CENTRI-SIFTER™

Kason

CENTRI-SIFTER™ Centrifugal Screeners and Separatorssift, scalp, de-lump and de-water virtually any bulk solid or slurry

Principle of Operation

Material is fed into the feed inlet and redirected into the cylindrical sifting chamber by means of a feed screw. Rotating, helical paddles within the chamber continuously propel the material against the screen, while the resultant, centrifugal force on the particles accelerates them through the apertures. These rotating paddles, which never make contact with the screen, also serve to breakup soft agglomerates. Over-sized particles and trash are ejected via the oversize discharge spout.

Features

• Dust-free, sanitary operation. Approved for use by USDA, FDA, BISSC, 3-A and other U.S. and European regulators
• Quiet, vibration-free action
• Quick screen change: 2 minutes or less
• Easy clean-out
• Double seal outboard bearings
• Rapid sieving action
• Heavy duty construction for continuous operation
• Compact design
• Low power requirements
• Integral cleaning/ inspection door
• Many sizes and single or twin models, including belt-driven units with motors ranging from 1 hp (.75 kW) to 7.5 hp (5.6 kW) and direct-driven units with motors ranging from 1 hp (.75 kW) to 7.5 hp (5.6 kW)


More